1 - 5 of 18
Force/torque sensors   
Catalog features 186 pages of piezoelectric force sensors, torque sensors, and straingauge load cells for test, measurement, monitoring, and control.

Control system is tailor made for mobile hydraulics   
The BODAS system and components are designed for operation of mobile equipment in harsh environments and feature easy-to-use development and interface tools for reliable system installation and easy s...

Get more from Closed-Loop Control   
Upgrading machines with closed-loop electrohydraulic control can boost performance to as good as or better than new machines.

Orientation sensor produces wireless signal   
Equipment designers have quite a range of sensor technologies to choose from — from simple pressure and limit switches to those used in global positioning systems.

Understanding pressure control with a varying load   
Last month we learned that the required voltage error at 5000 psi was 0.5 V, corresponding to 500 psi.

1 2
next
1 - 6 of 26
Electronic pressure switch    >>
PK series of non-contact, electronic pressure switch offers simple setup in compact 72 mm long housing. Features 316 stainless steel process connection. Welded, gas-tight meas...
 
Flow meter interface    >>
K-Factor scaler is field-adjustable frequency divider that converts lowlevel, pulsed frequency output from turbine flow meters to scaled, square output signals. Interfaces w...
 
Inline flow meter    >>
Inline flow meter features integral load cell, relief valve, glycerine-filled pressure gauge, and reverse flow capability. Accomodates flows to 150 gpm and pressures to 50...
 
Linear position transducers    >>
PT8000 series of linear cable-extension position transducers offers optional stainless steel enclosures for increased resistance in harsh environments. Provides meas...
 
Quick change LDT    >>
In-cylinder magnetostrictive linear displacement transducer has Rapid Replacement Module to cut downtime and make change-out of transducer electronics quick and easy witho...
 
Turbine flow meters    >>
CT series turbine flow meters handle output flow, pressure, and temperature as 0-5 Vdc or 4-20 mA. Nine models offer flow from 4 to 350 gpm at pressures to 7000 psi and te...
1 2
next
1 - 10 of 182
CEJN Industrial Corporation   Gurnee IL, US
Clippard Instrument Laboratory Inc   Cincinnati OH, US
Elesa USA Corporation   Twinsburg OH, US
Lenz Inc   Dayton OH, US
Webster Instruments   Milwaukee WI, US
Acromag Inc   Wixom MI, US
ACS Hydraulics   Eugene OR, US
Advanced Control Technology Inc   Shakopee MN, US
Airmo Inc   Minneapolis MN, US
Allegheny York Co   York PA, US

1 2 3 4 5
next
Designer's Guide Specification Chart: Hydraulic Pressure
Designer's Guide Specification Chart: Air